LUG - ARTERA LED - Park luminaires, Infrastructural lighting

ARTERA LED
S version

Other parameters available View variants

ARTERA LED
S version

Modern urban-park luminaire for LED light sources with suspended mounting and distinctive design.

High efficacy to 168 lm/W

Possible illuminance control

Modern design

Reliability

Application

Railway stations, avenues, facades, local roads, parking areas, parks, playgrounds, promenade, public spaces, residential, residential area roads, roads, sidewalks, town roads

Available on request

10kV surge protection, CLO, NEMA connector, NTC, ZHAGA connector, extension of the warranty to 10 years, iBLOC controller, twilight sensor

Luminous flux range

2250 - 15700 [lm]

Variable color temperature

2200 - 4000 [K]

Mechanical data

Mounting

suspended on a mounting tube with diameter ø42

Body colour

graphite, gray

Operating temperature range

-40 ... +45, -40 ... +50

RAL

7035

Body

high pressure die-cast aluminum

Lateral Surface Wind Exposed

0.048 m²

Type

S version (O12, O13, O14, O15, O16, O17, O18, O19, O20, O21, O22 optics), S version (O2, O3, O4, O5, O6L, O6P, O7, O8, O9, O10, O11 optics)

Electrical data

Power supply efficiency

≤90%

Power

220-240V 50/60Hz

Includes light source

yes

Luminaire power [W]

21 - 107

Output current [mA]

200, 300, 500, 700, 1050

Type of equipment

DALI, ED

Maximum number of luminaires in the circuit with a 16A fuse (B)

Optical data

Way of lighting

direct

Type of optic

O10 - for pedestrian zones, O11 - for local roads, O12 - for express roads, O13 - for local roads, O14 - for town roads, O15 - for residential area roads, O16 - for pedestrian crossings, left side traffic, O17 - for pedestrian crossings, right side traffic, O18 - for area lighting, O19 - for town and local roads, O2 - for express roads, O20 - for wet surfaces, O21 - for pedestrian zones, O22 - for local roads, O3 - for local roads, O4 - for town roads, O5 - for residential area roads, O6L - for pedestrian crossings, left side traffic, O6P - for pedestrian crossings, right side traffic, O7 - for area lighting, O8 - for town and local roads, O9 - for wet surfaces

Diffuser

tempered glass

Colour temperature [K]

2200, 2700, 3000, 4000

CRI/Ra

>70

MacAdam's steps

ULOR / DLOR

0% / 100%

Lumen luminaire [lm]

2250 - 15700

Efficacy [lm/W]

90 - 168

Photobiological risk group

RG0, RG1

Number of LEDs

General data

Additional information

Luminaires are not equipped with a tight connector; photobiological risk group RG0 (applies to selected indexes); luminaire equipped with 7 m cable; the pole and boom are not part of the luminaire ; the luminaire is fitted with a cable which must not be exposed to UV radiation

Lifetime L90B10

100 000 h

Warranty

5 years

Dimensions

Dimensions [mm] LxH	Pallet quantity	Quantity in package	Net weight [kg]
550x162	12	1	9.7

Code	Protection Class	Type of optic	Type of equipment	Luminaire power [W]	Lumen luminaire [lm]	Efficacy [lm/W]	Colour temperature [K]	CRI/Ra	Operating temperature range
130482.3L012.010	II	O2 - for express roads	DALI	49	5650	115	2200	>70	-40 ... +50
130482.3L012.020	II	O3 - for local roads	DALI	49	5500	112	2200	>70	-40 ... +50
130482.3L012.030	II	O4 - for town roads	DALI	49	5550	113	2200	>70	-40 ... +50
130482.3L012.040	II	O5 - for residential area roads	DALI	49	5600	114	2200	>70	-40 ... +50
130482.3L012.050	II	O6L - for pedestrian crossings, left side traffic	DALI	49	5600	114	2200	>70	-40 ... +50
130482.3L012.060	II	O6P - for pedestrian crossings, right side traffic	DALI	49	5600	114	2200	>70	-40 ... +50
130482.3L012.070	II	O7 - for area lighting	DALI	49	5650	115	2200	>70	-40 ... +50
130482.3L012.080	II	O8 - for town and local roads	DALI	49	5550	113	2200	>70	-40 ... +50
130482.3L012.090	II	O9 - for wet surfaces	DALI	49	5600	114	2200	>70	-40 ... +50
130482.3L012.100	II	O10 - for pedestrian zones	DALI	49	5250	107	2200	>70	-40 ... +50

Compliant with British Standards: BS 5489-1 2020; BS EN 13201 2015; BS EN 60598-2-3:2003+A1:2011 and BS EN IEC 60598-1:2021+A11:2022.

In order to apply the luminaire in an aggressive environment, for example with an increased concentration of sulfur, salt or other aggressive substances, a consultation with the LUG Technical Preparation of Production Branch is required.
Luminous flux tolerance +/- 10%.
Power tolerance +/- 5%.
Lighting beam, light intensity distribution and light efficiency were examined in accordance with the EN ISO 17025:2005 norm for EN13032 norm series and the LM-79 norm.
Up-to-date product info and General Warranty Terms available on our website www.luglightfactory.com
Detailed information on luminous fluxes and powers for individual indexes are indicated on the product data sheet.
The parameters in the data sheet are given for Ta=25°C.
The operating temperature ranges apply only to luminaires used in the outdoor environment.
Colour temperature tolerance +/- 5%.

Download Materials

Select and download the materials you are interested in

Product sheet

PDF (1.9MB)

Declarations and certificates

ZIP (1.4MB)

Light beam curves

ZIP (10.6MB)

3D/2D models

DWG (299.9KB)

RFA (468.8KB)

SKP (420.3KB)

Mounting instruction

PDF (5.4MB)

Download selected

CUSTOMISATION - OUR SETTING YOUR WAY

A luminaire, according to the Journal of Standards, is a device that is used to distribute, filter and convert the light output from one or more light-emitting sources, which is located in the mains

custom

Customisation

Bespoke - Let's develop a project together

A luminaire, according to the Journal of Standards, is a device that is used to distribute, filter and convert the light output from one or more light-emitting sources, which is located in the mains

bespoke

Bespoke

Comparison of families

ARTERA LED
S version

Product description

Technical parameters

To download